Puppy 3.01 final bugs reports here

Please post any bugs you have found
Message
Author
tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

Re: Puppy 3.01 final bugs reports here

#21 Post by tlchost »

LiveCd - this version doesn't recognize the hda-intel that 2,17,1 recognized on a Dell Dimension 5150.

kirk
Posts: 1553
Joined: Fri 11 Nov 2005, 19:04
Location: florida

#22 Post by kirk »

Booted up 301 this morning, stopped on loading the pup_save file again for about 2 minutes. Guess it's not just the first boot. The hard drive is busy doing something for 2 minutes. Maybe it is doing a fsck, but 2 minutes seems very long for that. Unless it's fscking more that just the pup_save file.

Firefox
Posts: 172
Joined: Fri 03 Nov 2006, 12:38
Location: UK

#23 Post by Firefox »

It WORKS, it WORKS, it WORKS, it WORKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
My PRINTER after 18 months of trying to get it to work under Puppy has finaly printed
out a TEST PAGE!!!!!!. I`m overjoyed.
The SECRET? installing devx_301.sfs by DesertPuppys instructions so I could install pnm2ppa driver, downloading foomatic-rip and foomatic-gswrapper and putting them in /usr/local/bin,putting PPD driver in /usr/share/cups/model then printed out a test page!
I did not get the foomatic error in previous releases.
My printer is HP710C and the driver can be used for 720c 722c 820cse,820cxi,1000cse,1000cxi.

What a FAB DISTRO

linuxcbon
Posts: 1312
Joined: Thu 09 Aug 2007, 22:54

#24 Post by linuxcbon »

/var/log/Xorg.0.log

Code: Select all

 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(EE) Failed to load module "glx" (module does not exist, 0)
(WW) RADEON(0): Direct rendering disabled

User avatar
Crash
Posts: 453
Joined: Fri 09 Dec 2005, 06:34
Location: Melbourne, FL

#25 Post by Crash »

Wolf Pup -

I noted the same problem in one of the beta tests, but I guess it got lost in the mix of things:

With a full install on a hard drive, the partition is not locked. ROX thinks you can mount it, which leads to really interesting results. GParted doesn't see the partition locked either.

This is not an issue with a frugal install, only for full install.

These screens show results for a Puppy 3.01 full install booted on hda2 and Puppy 3.01 frugal install booted on hda4:
Attachments
combo.png
(37.82 KiB) Downloaded 2076 times

Mic67

#26 Post by Mic67 »

netload network traffic

when using dialup modem does not display the ppp0 just the cancel button.

So this app, can not be used.

This was under Hydrant 3.01a and I figure it is likely in Barrys version.

BTW
Xorg worked where xvesa did not

I think it was the right combination but with xorg in this version with the right card has made a super fast computer - totally impressed.

Excellent work as per usual

Cheers mic67

vanchutr
Posts: 438
Joined: Sat 05 Aug 2006, 12:04

#27 Post by vanchutr »

Puppy 301 frugal install - good: via the isolinux boot loader (loadlin.exe and options.txt)
On my computer P4 - 512MB Ram (Onboard Graphic Card): Xorg don't work - Xorg worked good with Puppy 2.17.1
Xvesa runs well and fast.
Internet connection: good (with Auto DHCP via eth0 - card RTL-8139 Fast Ethernet - module 8139too bus PCI)
Remaster CD works with Barry's script named "remasterpup2c.sh" (an old version) (I don't see the remaster on main menu of Puppy 301)
Thank Puppy team. (Great work)

Sage
Posts: 5536
Joined: Tue 04 Oct 2005, 08:34
Location: GB

#28 Post by Sage »

Additional hurdles seem to have been erected in the Universal Installer?
It should be able to detect which CDdrive contains the boot CD, especially after booting from it?! I missed the new message first time around and got a pile of garbage before I swapped the CD over to the "expected" drive. I suspect that newcomers might also get confused by this message, although in my case case it was my fault - I do these installs on autopilot and don't tend to read everything displayed.
Contrarily, whilst the files (for a FULL install) are being manipulated (decompressed?) by the HD, there is a long period in which there is NO message on-screen. Given the pathetic or non-functioning HD l.e.d. s one finds these days, it could be construed as a lock-up/crash.

Seamonster has got to go! It is now taking upwards of 20s to load on decent HW.

Otherwise, all the stuff I use seems to be working just fine. Thanks.
Last edited by Sage on Wed 17 Oct 2007, 08:44, edited 1 time in total.

User avatar
Greatnessguru
Posts: 106
Joined: Mon 09 Jul 2007, 21:07
Location: rural McBain MI USA (near Cadillac MI)
Contact:

SeaMonkey Modern theme... no difference.

#29 Post by Greatnessguru »

With PL 3.01 I tried changing the SeaMonkey theme to Modern.
Restarted SeaMonkey.
Modern is shown as selected, but the icons look the same as Classic.

I use Modern on my Mac, so I know what they should look like.

Thank you,
Eddie

Bruce B

#30 Post by Bruce B »

Crash,

I take it that in the bottom pic, Full is running on hda2?

If so, it seems very odd. Because, I'm running the same version of MUT on 217 and it displays right. I have hda1, hda2 and hda3 mounted.

See pic

Bruce
Attachments
mut-on-217.png
(38.37 KiB) Downloaded 1942 times

User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

Re: PETget won't connect to distro sites

#31 Post by ttuuxxx »

DLWood wrote:I'm still not able to use the PETget package manager to install packages with any version 3 of Puppy, including 3.01. If I try "nluug" or "gatech" I get a pop-up message that says the site is UNREACHABLE, and asks if I'm connected to the internet -- yes I am; I can browse all day long. If I try to connect to "ibiblio", it just times out and keeps trying w/o success (about every 3 minutes or so).

I just tried it with 2.17 and it works fine with my dsl modem/router setup. Version 3 does not.

Is anyone else having this problem?
never heard of that problem, it works fine for me, i am sure my Fire Hydrant works fine also. you could try it if you want its based on 3.0 www.ttuuxxx.com

you can always just download the packages direct from ftp://ibiblio.org/pub/linux/distributions/puppylinux and save them to root and then run your package manager to install them, have fun :)

DLWood
Posts: 38
Joined: Wed 20 Sep 2006, 22:54

Re: PETget won't connect to distro sites

#32 Post by DLWood »

ttuuxxx wrote:
DLWood wrote:I'm still not able to use the PETget package manager to install packages with any version 3 of Puppy, including 3.01. If I try "nluug" or "gatech" I get a pop-up message that says the site is UNREACHABLE, and asks if I'm connected to the internet -- yes I am; I can browse all day long. If I try to connect to "ibiblio", it just times out and keeps trying w/o success (about every 3 minutes or so).

I just tried it with 2.17 and it works fine with my dsl modem/router setup. Version 3 does not.

Is anyone else having this problem?
never heard of that problem, it works fine for me, i am sure my Fire Hydrant works fine also. you could try it if you want its based on 3.0 www.ttuuxxx.com

you can always just download the packages direct from ftp://ibiblio.org/pub/linux/distributions/puppylinux and save them to root and then run your package manager to install them, have fun :)
I received a PM from another Puppy user that said he was experiencing the same problem, so there are at least 2 of us out there not being able to use the PETget manager. It worked for me with all the Puppy versions from 2.10 to 2.17 w/o any problems. It's just the beta and final versions of 3.0 and 3.01 that is causing the problem.

I did download several packages and installed them manually, and that works OK, but I'd really like to use the built-in manager if possible.

Thanks ttuuxxx for your post; I'll check out Fire Hydrant.

User avatar
Crash
Posts: 453
Joined: Fri 09 Dec 2005, 06:34
Location: Melbourne, FL

#33 Post by Crash »

Bruce B-

Yes, the bottom shot is running 3.01 full install on HDA2. Also, I have 2.17 full install on HDA3 and MUT shows up OK on it. I didn't post a screen shot, but it looks like yours. So I conclude it is a 3.xx issue. I note that GParted does not show the partition to be locked under a 3.01 full install, but it is locked under a 3.01 frugal or 2.17 full install.

rafo
Posts: 6
Joined: Thu 18 Jan 2007, 09:17

burniso2cd, icons, keyboard shortcuts on netsurf

#34 Post by rafo »

Hi,

just 3 things to comment on:

1. burniso2cd didn't work for me. Some gtkdialog thing...

2. I liked the icons of 2.17 better.

3. Someone already commented on this: No keyboard shortcuts on netsurf for me. Not even going 1 page down with the space bar.

Cheers and thanks for a great distro,

ra

vientito
Posts: 83
Joined: Sun 17 Sep 2006, 23:22

xfs disks can't be mounted; module absent

#35 Post by vientito »

in the latest 3.01 version I could not mount all my xfs formatted disks. in all previous versions, kernel module xfs was always present but this latest one seems not to include in either module or built-in.

vientito
Posts: 83
Joined: Sun 17 Sep 2006, 23:22

#36 Post by vientito »

second someone's observation about UTF-8 locale issue. it seems to affect mine as well. 3.01 final has not fixed that issue.

kirk
Posts: 1553
Joined: Fri 11 Nov 2005, 19:04
Location: florida

#37 Post by kirk »

1. burniso2cd didn't work for me. Some gtkdialog thing...
I was going to post that as a bug, but then it went away. Now, even if I boot up ram only it still works. Don't know what was causing it. It was an Xdialog usage error window.

User avatar
GatorDog
Posts: 138
Joined: Tue 12 Sep 2006, 16:43

Puppy 3.01 final bugs reports here

#38 Post by GatorDog »

Reposted here instead 3.0 bugs :oops:
willhunt wrote:somehow I broke my new puppy :(
anyone know if this is a 3.0 problem
or something I've done?
here is the error I get
# kp
couldn't load file "/usr/lib/tcl8.5/gnocl-0.9.91/gnocl.so":
/usr/lib/libgtk-x11-2.0.so.0: undefined symbol:
cairo_pdf_surface_create
while executing
"load /usr/lib/tcl8.5/gnocl-0.9.91/gnocl.so"
("package ifneeded Gnocl 0.9.91" script)
invoked from within
"package require Gnocl"
(file "/usr/sbin/kp" line 16)
#

/usr/lib/tcl8.5/gnocl-0.9.91/gnocl.so is there and there is no .wh. files
???
Menu/Multimedia/Puppy Sound Mixer doesn't run. If I try to start
it in a terminal ( pvolume-mixer.tcl), I get the same error as above
except the last line is - (file "/usr/sbin/pvolume-mixer.tcl" line 17).

Also, I get the same error as above with "kp".


Pup 3.01 w/ EZpup 3.0

rod

cylock
Posts: 9
Joined: Thu 13 Sep 2007, 13:10

petget

#39 Post by cylock »

version 3.01 compaq 7000 400MB 800Mhz

petget wont connect to nuug or gatech but just keeps retrying on ibiblio.

worked fine on 2.** series

any ideas yet?

Wolf Pup
Posts: 637
Joined: Fri 28 Apr 2006, 01:37

#40 Post by Wolf Pup »

for anyone having trouble printing with their hp printer, try this, delete printer from cups, then remove hpijs-1.7, install the hpijs package below, restart puppy, test if the printer works

http://puppylinux.ca/bugs/
(thanks to Caneri for providing exp dir)
Last edited by Wolf Pup on Tue 04 Dec 2007, 16:49, edited 1 time in total.
[img]http://img230.imageshack.us/img230/8595/ubd6467dp2.png[/img]
[url=http://www.tinyurl.com/54tu74]Visit The Repository[/url] - Helpful and hard-to-find treats for Puppy 3.
[url=http://www.tinyurl.com/c5a68f]Click Here for Puppy Support Chat, + Helpful Links.[/url]

Post Reply