How to use Trendnet TEW-229UB USB wifi stick?
-
- Posts: 9
- Joined: Mon 15 Oct 2007, 12:46
How to use Trendnet TEW-229UB USB wifi stick?
Hi
I'm new to Puppy, familiar with Ubuntu and not afraid of cli...
I have Puppy as a frugal install on my OQO 01+. It has a wireless adapter built in (actually on the usb bus)
Vendor ID 1557
Product ID 0002
I also have the USB stick which is the same vendor but product ID is 0003
As far as I can tell these are both Atmel 76 chipsets, but I can't get Puppy to load the module. Nor can I get NDISwrapper to work with the .inf file I downloaded from Trendnet's website (Win200 version)
Any pointers much appreciated, even if it's just for a USB dongle that will work! I should point out that the USB stick has worked on Ubuntu for over two years on various machines, including the OQO.
Many thanks
I'm new to Puppy, familiar with Ubuntu and not afraid of cli...
I have Puppy as a frugal install on my OQO 01+. It has a wireless adapter built in (actually on the usb bus)
Vendor ID 1557
Product ID 0002
I also have the USB stick which is the same vendor but product ID is 0003
As far as I can tell these are both Atmel 76 chipsets, but I can't get Puppy to load the module. Nor can I get NDISwrapper to work with the .inf file I downloaded from Trendnet's website (Win200 version)
Any pointers much appreciated, even if it's just for a USB dongle that will work! I should point out that the USB stick has worked on Ubuntu for over two years on various machines, including the OQO.
Many thanks
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Try
then to check if the module has loaded
then check if the module has created a wifi interface
I checked the source code of the at76_usb module and device id 1557 0002 is not defined.
So if you have no success, we could hack the source code to include this device id, but I need to know which variant of the driver is compatible.
Please run "lsmod" in Ubuntu to see what module is being used for your device. It should be something like at76c503-xxx.
Code: Select all
modprobe at76_usb
Code: Select all
lsmod
Code: Select all
ifconfig -a
So if you have no success, we could hack the source code to include this device id, but I need to know which variant of the driver is compatible.
Please run "lsmod" in Ubuntu to see what module is being used for your device. It should be something like at76c503-xxx.
-
- Posts: 9
- Joined: Mon 15 Oct 2007, 12:46
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Well there's the problem; Puppy cannot locate the zdrv file, which contains its collection of drivers.pauljwells wrote:FATAL: Module at76_usb not found.
You say you have a frugal installation, which I thought was reliable for locating the zdrv file and loading extra modules? Someone else will need to jump in and help, or you will need to search the forum for "zdrv".
And it may help to tell us which version of Puppy you are using.
-
- Posts: 9
- Joined: Mon 15 Oct 2007, 12:46
Hi
Thanks for the tip! I found the zdrv file and mounted it then copied all the files to /
My USB stick was then found and the module loaded, scanning works and finds my network, but now I can't get the wep to work.
I'm on slightly firmer ground though now, having gone through this sort of thing dozens of times in the past, so I'll play around a bit more.
I really hope I can get all this working as Puppy seems such a perfect fit for the OQO.
Many thanks
Paul
Thanks for the tip! I found the zdrv file and mounted it then copied all the files to /
My USB stick was then found and the module loaded, scanning works and finds my network, but now I can't get the wep to work.
I'm on slightly firmer ground though now, having gone through this sort of thing dozens of times in the past, so I'll play around a bit more.
I really hope I can get all this working as Puppy seems such a perfect fit for the OQO.
Many thanks
Paul
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Unfortunately this will bloat your pupsave file, and maybe consume RAM unnecessarily, that's the whole reason why Puppy keeps the module collection outside the main filesystem, and loads only the extra modules it needs on-demand ... but anyway, it's working for you.pauljwells wrote:I found the zdrv file and mounted it then copied all the files to /
Regarding WEP, yes, I'm seeing a few WEP-related problems reported under Puppy 3.00.
Maybe try loading a few required modules first, before running the Network Wizard -
Code: Select all
modprobe arc4
modprobe crc32c
- scotto_puppy
- Posts: 39
- Joined: Thu 22 Mar 2007, 21:56
- Location: Elvina Bay, NSW,Australia
-
- Posts: 9
- Joined: Mon 15 Oct 2007, 12:46
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
I'm wondering if the wireless tools utilities (iwconfig, etc) are at fault.
I now attach updated wireless tools. Try the stable version 29 first.
EDIT: attachments removed.
I now attach updated wireless tools. Try the stable version 29 first.
EDIT: attachments removed.
Last edited by tempestuous on Thu 18 Oct 2007, 15:52, edited 1 time in total.
-
- Posts: 9
- Joined: Mon 15 Oct 2007, 12:46
Hi
Neither of the wireless tools packages made any difference
"Unable to connect to a wireless network"
I found that the zdrv thing is a bug in 3.00 - it doesn't get loaded unless you already have a pup_save file, which was another problem I had! (I finally copied one from another machine). Once this file exists it works fine and the zdrv file gets loaded properly. So now it's just this pesky wireless and I'll be sorted...
Neither of the wireless tools packages made any difference
"Unable to connect to a wireless network"
I found that the zdrv thing is a bug in 3.00 - it doesn't get loaded unless you already have a pup_save file, which was another problem I had! (I finally copied one from another machine). Once this file exists it works fine and the zdrv file gets loaded properly. So now it's just this pesky wireless and I'll be sorted...
Re: How to use Trendnet TEW-229UB USB wifi stick?
pup 2.12 right thru to 2.17.1 / d-link dwl g122 ver b1 with wep 64 hexpauljwells wrote:Any pointers much appreciated, even if it's just for a USB dongle that will work!
Haven't tried with pup v3
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
It would be worth checking the output of dmesg -
then open dmesg.txt in geany. Look for anything relevant to the zd1211rw driver.
I have a suspicion that the firmware_class module might be failing to load, and the zd1211rw firmware will then not load.
If so, the fix is easy; pre-load the firmware_class module -
Code: Select all
dmesg > dmesg.txt
I have a suspicion that the firmware_class module might be failing to load, and the zd1211rw firmware will then not load.
If so, the fix is easy; pre-load the firmware_class module -
Code: Select all
modprobe firmware_class