HI people,
I've just downloaded tazpuppy-5.0-beta-54.iso - frugally installed it on my compaq 6710B laptop where I house a collection of puppies and dogs. It boots fine but does no go to desktop. I have booted with both tux login and root login but still no X, only commandline.
TazPuppy 5.0 rc2
@gabtech
What's the specs of your laptop?
Could you please send me the xorg.conf file (located at /etc/X11) of other puppies which works on your laptop?
Also when you boot tazpuppy, did you create savefile upon shutdown? If yes; then boot other puppy, mount the savefile of tazpuppy, get the Xorg.0.log file (located at /var/log) and Device.conf file (located at /etc/X11/xorg.conf.d) then send it here.
What's the specs of your laptop?
Could you please send me the xorg.conf file (located at /etc/X11) of other puppies which works on your laptop?
Also when you boot tazpuppy, did you create savefile upon shutdown? If yes; then boot other puppy, mount the savefile of tazpuppy, get the Xorg.0.log file (located at /var/log) and Device.conf file (located at /etc/X11/xorg.conf.d) then send it here.
Tazpuppy Beta 54(booting to commandline
Hi mistfire,
Find attached requested files. No Xorg.0.log file (found at /var/log).
System: Host: dellbot Kernel: 3.14.56 i686 (32 bit, gcc: 4.8.4) Desktop: JWM git-976 Distro: tahrpup 6.0.5
Machine: System: Hewlett-Packard (portable) product: N/A version: F.0B
Mobo: Hewlett-Packard model: 30C0 version: KBC Version 71.2A
Bios: Hewlett-Packard version: 68DDU Ver. F.0B date: 08/02/2007
CPU: Dual core Intel Core2 Duo CPU T7500 (-MCP-) cache: 4096 KB flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 8777.3
Clock Speeds: 1: 800.00 MHz 2: 2201.00 MHz
Graphics: Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary) bus-ID: 00:02.0
X.org: 1.15.1 drivers: intel (unloaded: vesa) tty size: 80x24 Advanced Data: N/A for root
Audio: Card: Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k3.14.56
Network: Card-1: Broadcom NetLink BCM5787M Gigabit Ethernet PCI Express driver: tg3 ver: 3.136 bus-ID: 18:00.0
IF: eth0 state: down mac: <filter>
Card-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
driver: iwl4965 ver: in-tree: bus-ID: 10:00.0
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 320.1GB (40.1% used) 1: id: /dev/sda model: Hitachi_HTS54503 size: 320.1GB
Partition:
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 139 Uptime: 50 min Memory: 356.2/998.3MB Runlevel: 5 Gcc sys: 4.8.4 Client: Shell (sh) inxi: 1.9.17
Find attached requested files. No Xorg.0.log file (found at /var/log).
System: Host: dellbot Kernel: 3.14.56 i686 (32 bit, gcc: 4.8.4) Desktop: JWM git-976 Distro: tahrpup 6.0.5
Machine: System: Hewlett-Packard (portable) product: N/A version: F.0B
Mobo: Hewlett-Packard model: 30C0 version: KBC Version 71.2A
Bios: Hewlett-Packard version: 68DDU Ver. F.0B date: 08/02/2007
CPU: Dual core Intel Core2 Duo CPU T7500 (-MCP-) cache: 4096 KB flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 8777.3
Clock Speeds: 1: 800.00 MHz 2: 2201.00 MHz
Graphics: Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary) bus-ID: 00:02.0
X.org: 1.15.1 drivers: intel (unloaded: vesa) tty size: 80x24 Advanced Data: N/A for root
Audio: Card: Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k3.14.56
Network: Card-1: Broadcom NetLink BCM5787M Gigabit Ethernet PCI Express driver: tg3 ver: 3.136 bus-ID: 18:00.0
IF: eth0 state: down mac: <filter>
Card-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
driver: iwl4965 ver: in-tree: bus-ID: 10:00.0
IF: wlan0 state: up mac: <filter>
Drives: HDD Total Size: 320.1GB (40.1% used) 1: id: /dev/sda model: Hitachi_HTS54503 size: 320.1GB
Partition:
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 139 Uptime: 50 min Memory: 356.2/998.3MB Runlevel: 5 Gcc sys: 4.8.4 Client: Shell (sh) inxi: 1.9.17
- Attachments
-
- tazpup-xorg.conf.d.tar.gz
- (1.58 KiB) Downloaded 113 times
-
- tahr6.0.5-xorg.conf.tar
- (4.77 KiB) Downloaded 118 times
@gabtech
Thanks for the files that you sent to me
May I see the Xorg.0.log (located at /var/log) and xerrs.log (located at /tmp) of your tahrpup
Also run "busybox lspci" on terminal of your tahrpup and post the terminal output here
If Xorg.0.log file was missing on TazPuppy kindly do the following:
1. Boot TazPuppy with Savefile loaded.
2. If you reached terminal login then logged in as root.
3. Type this on command line
4. Now restart the computer and boot other puppy
5. Mount the tazpuppy savefile and get the Xorg.0.log at /root folder from the save file
6. Upload the Xorg.0.log on this thread
Thanks for the files that you sent to me
May I see the Xorg.0.log (located at /var/log) and xerrs.log (located at /tmp) of your tahrpup
Also run "busybox lspci" on terminal of your tahrpup and post the terminal output here
If Xorg.0.log file was missing on TazPuppy kindly do the following:
1. Boot TazPuppy with Savefile loaded.
2. If you reached terminal login then logged in as root.
3. Type this on command line
Code: Select all
cp -f /var/log/Xorg.0.log /root/Xorg.0.log5. Mount the tazpuppy savefile and get the Xorg.0.log at /root folder from the save file
6. Upload the Xorg.0.log on this thread
Tazpuppy Beta 54(booting to commandline)
Hello mistfire,
Files attached.
Files attached.
- Attachments
-
- capture32594.png
- (153.31 KiB) Downloaded 33 times
-
- tahr-xerrs.log.tar
- (2.5 KiB) Downloaded 127 times
-
- tahr-Xorg.0.log.tar
- (17.3 KiB) Downloaded 118 times
-
- tazpup-Xorg.0.log.tar
- (5.66 KiB) Downloaded 118 times
Tazpuppy Beta 54(booting to commandline)
Hi mistfire,
I downloaded two flavors of slitaz to test - I used to have slitaz 2 running on one of my computers. The first one I tested was slitaz4-firefox which booted alright upto desktop, but the desktop was blank. I then removed it and tried slitaz3-vesa which booted alright with a working desktop.
I downloaded two flavors of slitaz to test - I used to have slitaz 2 running on one of my computers. The first one I tested was slitaz4-firefox which booted alright upto desktop, but the desktop was blank. I then removed it and tried slitaz3-vesa which booted alright with a working desktop.
@gabtech slitaz uses older xorg driver while TazPuppy uses newer xorg. Old xorg server lack of glamor acceleration. I finally found the root problems on TazPuppy why it failed to start X on other gpu devices. I downgraded xorg-server one step backward but retains glamor acceleration to match the supported xorg server version of xorg drivers.
@ mistfire,
I had to find out how to do the capture from the live-session terminal.
Here are the the two files.
I had to find out how to do the capture from the live-session terminal.
Here are the the two files.
- Attachments
-
- xorgconfautogen..tar
- (10 KiB) Downloaded 123 times
-
- busyboxlspci..tar
- (10 KiB) Downloaded 124 times
Tazpuppy beta 55 released
Changes:
* Issues on Xorg was fixed
* Improved package management
* Improvements on TazPanel
* Improved sfs module loading
* Fixed issues upon using root account
* Fixed TazPuppy Blue theme (default openbox theme of TazPuppy)
Download:https://drive.google.com/open?id=154Mwx ... 0Cf8R7Kj-A
MD5 Checksum: f07d9dd2e260a82d30845c3c8d7d3dbd
Build kit: https://drive.google.com/open?id=1y06FF ... mt_VWlvy8p
Changes:
* Issues on Xorg was fixed
* Improved package management
* Improvements on TazPanel
* Improved sfs module loading
* Fixed issues upon using root account
* Fixed TazPuppy Blue theme (default openbox theme of TazPuppy)
Download:https://drive.google.com/open?id=154Mwx ... 0Cf8R7Kj-A
MD5 Checksum: f07d9dd2e260a82d30845c3c8d7d3dbd
Build kit: https://drive.google.com/open?id=1y06FF ... mt_VWlvy8p
Tazpuppy Beta 55
Hi mistfire,
Just downloaded the new tazpup iso, booted it and currently using it to post to the forum. The task toolbar is not showing below the desktop. I can only see a flashing bar.
Just downloaded the new tazpup iso, booted it and currently using it to post to the forum. The task toolbar is not showing below the desktop. I can only see a flashing bar.
Working ok here on HP core2 laptop, running through ISObooter.
WiFi connection is easy with Network > Wi-Fi connection.
To find out how to adjust the screen brightness was more difficult. I got to use the terminal: 'set-backlight 75 intel_backlight'
Both Midori and the TazWeb Browser are working, posting from the latter.
Two icons for the wlan0 Network connection show up in the notification area bottom right, one has a 'one way' sign superimposed.
Sound tested ok with ALSA sound Wizard.
So far so good, thanks.
proebler
WiFi connection is easy with Network > Wi-Fi connection.
To find out how to adjust the screen brightness was more difficult. I got to use the terminal: 'set-backlight 75 intel_backlight'
Both Midori and the TazWeb Browser are working, posting from the latter.
Two icons for the wlan0 Network connection show up in the notification area bottom right, one has a 'one way' sign superimposed.
Sound tested ok with ALSA sound Wizard.
So far so good, thanks.
proebler
- Attachments
-
- TazPuppy_TazWeb-Browser.png
- (109.5 KiB) Downloaded 31 times
@gabtech
That's weird that lxpanel crash on your computer while on @proebler's computer doesn't.
Do the following:
1. Boot tazpuppy in pristine state
2. Logged in as root
3. Click Documents from Desktop and go to /usr/bin
4. Right click Xorg and open with geany
5. Press CTRL + H or Click Edit>Replace from menu bar
Find: "$@"
Replace with: "$@" 2>/root/xerrs.log
6. Click "Replace" twice
7. Click Save
8. Press CTRL + ALT + BACKSPACE to restart Xorg
9. Logged in as tux
10. Wait for at least a minute after logged in
11. Click Documents from Desktop and go to /root
12. Get xerrs.log file and save on your storage device
13. Boot other puppy and send the xerrs.log that you saved from storage device here
That's weird that lxpanel crash on your computer while on @proebler's computer doesn't.
Do the following:
1. Boot tazpuppy in pristine state
2. Logged in as root
3. Click Documents from Desktop and go to /usr/bin
4. Right click Xorg and open with geany
5. Press CTRL + H or Click Edit>Replace from menu bar
Find: "$@"
Replace with: "$@" 2>/root/xerrs.log
6. Click "Replace" twice
7. Click Save
8. Press CTRL + ALT + BACKSPACE to restart Xorg
9. Logged in as tux
10. Wait for at least a minute after logged in
11. Click Documents from Desktop and go to /root
12. Get xerrs.log file and save on your storage device
13. Boot other puppy and send the xerrs.log that you saved from storage device here