LxPupSc: Woof-CE, Slackware-Current, LXDE build 13-Jun-2020

Message

peebee · #1101 Post by **peebee** » Fri 01 Feb 2019, 23:59

Kernel Release: 4.20.6-lxpup64
Build Date: Fri Feb 1 07:30:15 GMT 2019
Build GCC: 8.2.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

peebee · #1102 Post by **peebee** » Sun 03 Feb 2019, 12:29

Delta to 19.01+2

ISO md5 = 8dd76f7d2397918840a1db4f86d66b2e LxPupSc-19.01+2-uefi-T-k64.iso
Must be applied to: 6170f756b6087d67ba2f42bd23abe7ff LxPupSc-19.01+0-uefi-T-k64.iso

new BUILD_FROM_WOOF='testing;3707b590;2019-01-23 09:47:36 +0800'

+Slackware Current updates

peebee · #1103 Post by **peebee** » Thu 07 Feb 2019, 08:58

Kernel Release: 4.20.7-lxpup64
Build Date: Thu Feb 7 07:27:01 GMT 2019
Build GCC: 8.2.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

Marv · #1104 Post by **Marv** » Thu 07 Feb 2019, 15:38

Kernel Release: 4.20.7-lxpup64 swapped into the current LxPupSc and LxPupSc64 pups. Boot, sound, wireless, standard system checks and video FPS all ok on first look in both. I have about 5 days running 4.20.6 in both with no problems at all to note. I'll run with 4.20.7 in them from now. Slimjet Version 21.0.8.0 run-as-spot continues to run very well in this kernel swapped LxPupSc as does 21.0.7.0 in the kernel swapped LxPupSc64.

Cheers,

peebee · #1105 Post by **peebee** » Wed 13 Feb 2019, 09:12

Kernel Release: 4.20.10-lxpup64
Build Date: Fri Feb 15 12:00:01 GMT 2019
Build GCC: 8.2.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

peebee · #1106 Post by **peebee** » Fri 15 Feb 2019, 14:16

.9 seems to have been skipped - now kernel 4.20.10

peebee · #1107 Post by **peebee** » Sat 16 Feb 2019, 14:35

Delta to 19.01+3

ISO md5 = 0a727961ea480a2f713080a3bdff1b19 LxPupSc-19.01+3-uefi-T-k64.iso
Must be applied to: 6170f756b6087d67ba2f42bd23abe7ff LxPupSc-19.01+0-uefi-T-k64.iso

BUILD_FROM_WOOF='testing;8a6f7720;2019-02-14 12:32:01 +0800'
Slackware Current Fri Feb 15 21:02:33 UTC 2019

Marv · #1108 Post by **Marv** » Tue 19 Feb 2019, 10:36

Running the 4.20.10 kernel in both LxPupSc 19.01 +3 and LxPupSc64 19.01 +3 on the intel i5 based Fujitsu S761 laptop. Nothing seen to report in either. The usual system checks done and taxes finished up. MasterPDFEditor called upon for its once-a-year duties fixing bad fillable forms etc. As usual bouncing between upupbb, upupcc, and the two LxPups. Common profiles for mail, browser, clipboard, etc., having all data outside pupspace and using SFS loaded main progs makes it pretty seamless. Wallpaper reminds me which I'm in

Thanks,

peebee · #1109 Post by **peebee** » Wed 20 Feb 2019, 19:12

Kernel Release: 4.20.12-lxpup64
Build Date: Sat Feb 23 17:19:13 GMT 2019
Build GCC: 8.2.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

peebee · #1110 Post by **peebee** » Sat 23 Feb 2019, 19:12

Kernel 4.20.12

peebee · #1111 Post by **peebee** » Sun 24 Feb 2019, 11:37

Delta to 19.01+5

ISO md5 = fe3634a0f0b68ee16cd2faacaccc9b0b LxPupSc-19.01+5-uefi-T-k64.iso
Must be applied to: 6170f756b6087d67ba2f42bd23abe7ff LxPupSc-19.01+0-uefi-T-k64.iso

Woof-CE & Slackware Current updates.
New devx with GCC-8.3.0

Marv · #1112 Post by **Marv** » Wed 27 Feb 2019, 03:09

Kernel 4.20.12 up for two days in both LxPupSc 19.01 +4 and LxPupSc64 19.01 +4. Running on the Fujitsu S761 i5 based laptop, Grub4Dos frugal install to SSD. Systemchecks on both look fine, daily use ok also. Done with taxes so everything saved, sent, printed, and MasterPDFEditor put away and back to pretty mundane daily use only. I'm in LxPupSc right now.

Basically nothing to note on either at this point.

Cheers,

peebee · #1113 Post by **peebee** » Wed 27 Feb 2019, 10:19

+5 has:
OpenSSL: 1.1.1b 26 Feb 2019, built on: Tue Feb 26 23:40:10 2019 UTC

peebee · #1114 Post by **peebee** » Wed 27 Feb 2019, 15:50

Kernel Release: 4.20.13-lxpup64
Build Date: Wed Feb 27 10:35:47 GMT 2019
Build GCC: 8.3.0 <-*******************
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

peebee · #1115 Post by **peebee** » Wed 06 Mar 2019, 12:16

Kernel 5.0 has been released, but aufs5 has not yet appeared (and changes are needed to kernel-kit in woof-ce), so for now we stick with 4.20....

Kernel Release: 4.20.14-lxpup64
Build Date: Wed Mar 6 07:35:35 GMT 2019
Build GCC: 8.3.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

Marv · #1116 Post by **Marv** » Fri 08 Mar 2019, 16:00

4.20.14-lxpup64 kernel briefly tested in both the current LxPupSc and LxPupSc64. Skipped 4.20.13

Nothing out of the ordinary seen in either the usual dmesg/system checks or some normal use in either on the i5 based S761 laptop.

The national weather service threw me another curveball on their animated radar loops. Had been working in both the slackware and buntu derivs, Slimjet 32b 21.0.8.0 or 64b 21.0.7.0 and stopped working (right while I was looking at it!) in the slackware derivs but not in any of the buntu ones. Works fine there. It's just another flash thing and I haven't yet sorted it but I currently am mostly running LxPupBionic so it's only a headscritcher, not an issue. I've done all of the lib/flash version inspections and some subs but it remains a puzzle. All other youtubes/animations work perfectly in both.

Cheers,

peebee · #1117 Post by **peebee** » Sun 10 Mar 2019, 09:20

Kernel Release: 4.20.15-lxpup64
Build Date: Sun Mar 10 07:17:30 GMT 2019
Build GCC: 8.3.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

peebee · #1118 Post by **peebee** » Sun 10 Mar 2019, 19:20

Kernel Release: 5.0.1-lxpup64
Build Date: Sun Mar 10 18:20:14 GMT 2019
Build GCC: 8.3.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

Marv · #1119 Post by **Marv** » Sun 10 Mar 2019, 23:39

The 5.0.1-lxpup64 kernel popped into LxPupSc and LxPupSc64, both 19.01 +5. Made the 4.20.15 test very brief but also very uneventful. Hardware is:

Code: Select all

System:    Host: puppypc16298 Kernel: 5.0.1-lxpup64 x86_64 (64 bit) Desktop: LXDE (Openbox 3.6.1)
           Distro: LxPupSc64 19.01
Machine:   Device: laptop System: FUJITSU product: LIFEBOOK S761 serial: R2500459
           Mobo: FUJITSU model: FJNB225 UEFI [Legacy]: FUJITSU // Phoenix v: Version 1.17 date: 03/14/2012
Battery    CMB1: charge: 39.2 Wh 100.0% condition: 39.2/56.0 Wh (70%)
CPU:       Dual core Intel Core i5-2520M (-HT-MCP-) speed/max: 1109/3200 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           Display Server: X.org 1.20.4 drivers: intel (unloaded: modesetting,vesa) FAILED: fbdev
           tty size: 134x32 Advanced Data: N/A for root
Network:   Card: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) driver: ath9k
Drives:    HDD Total Size: 120.0GB (39.9% used)
Weather:   Weather data failure: Sun Mar 10 18:28:10 CDT 2019
           Error: weather info downloaded but no data detected.
Info:      Processes: 160 Uptime: 2:26 Memory: 401.5/4788.4MB Client: Shell (bash) inxi: 2.3.8

Held my breath... and then let it out. Clean boot in both, no new or changed dmesg fails or warnings, glxgears FPS excellent in both pups, CPU % at idle unchanged at 1%, memory use at idle might be up 20 or 30Mb but unless that changes dramatically, I really don't notice. All of my machines are 4Gb now. Quick check of sound (au,wav,ogg,m4a,mp3) ok, external USB3 connected SSD mounts and unmounts cleanly, guess I'll use it and see if anything interesting pops up.

Cheers,

peebee · #1120 Post by **peebee** » Thu 14 Mar 2019, 15:06

Kernel Release: 5.0.2-lxpup64
Build Date: Thu Mar 14 07:32:28 GMT 2019
Build GCC: 8.3.0
OS Support: GNU/Linux
Architecture: x86_64
SMP Enabled: Yes

From Here

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

LxPupSc: Woof-CE, Slackware-Current, LXDE build 13-Jun-2020