8Geee released AtomicPup 18 on May 2, 2018 and AtomicPup XIX on Aug 17, 2018
More information:
http://www.murga-linux.com/puppy/viewto ... 2&start=90
Download iso:
AtomicPup 18: https://archive.org/details/AtomicPup-18
AtomicPup XIX: https://archive.org/details/AtomicPupXIX
I have created 6 half-Chinese language pets for AtomicPup 18 and XIX:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.2.0.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.2.0.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.2.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.0.pet (9.5 mb)
Plus 2 Chinese language pets each for AtomicPup 18 and XIX:
Simplified Chinese:
atomicpup-18-zhcn-12.2.0.pet (3.6 mb)
atomicpup-xix-zhcn-12.2.0.pet (3.6 mb)
Traditional Chinese:
atomicpup-18-zhhk-12.2.0.pet (2.8 mb)
atomicpup-xix-zhhk-12.2.0.pet (2.8 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in AtomicPup 18 and XIX
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for AtomicPup 18 and XIX
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese Language Pets
Chinese language pets
Further to the release of VIVID Beta2 by csipesz in March 2018, VIVID Beta2 "Brutal Puppy" Final was released on Aug 19, 2018
More information:
http://skamilinux.hu/phpBB3/viewtopic.php?p=6978#p6978
Download iso:
https://mega.nz/#F!YA8nGTBB!Bx06FHnikrQ ... sp=sharing
I have created 6 half-Chinese language pets for VIVID Beta2 "Brutal Puppy" Final:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.0.6s.pet (18.7 mb)
scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.0.6s.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.0.6s.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.0.6s.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.0.6s.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.0.6s.pet (9.5 mb)
Plus 2 Chinese language pets each for VIVID Beta2 "Brutal Puppy" Final:
Simplified Chinese:
vivid-b2-csip2018.08-zhcn-12.0.6s.pet (4.1 mb)
Traditional Chinese:
vivid-b2-csip2018.08-zhhk-12.0.6s.pet (3.6 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in VIVID Beta2 "Brutal Puppy" Final
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for VIVID Beta2 "Brutal Puppy" Final
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
More information:
http://skamilinux.hu/phpBB3/viewtopic.php?p=6978#p6978
Download iso:
https://mega.nz/#F!YA8nGTBB!Bx06FHnikrQ ... sp=sharing
I have created 6 half-Chinese language pets for VIVID Beta2 "Brutal Puppy" Final:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.0.6s.pet (18.7 mb)
scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.0.6s.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.0.6s.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.0.6s.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.0.6s.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.0.6s.pet (9.5 mb)
Plus 2 Chinese language pets each for VIVID Beta2 "Brutal Puppy" Final:
Simplified Chinese:
vivid-b2-csip2018.08-zhcn-12.0.6s.pet (4.1 mb)
Traditional Chinese:
vivid-b2-csip2018.08-zhhk-12.0.6s.pet (3.6 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in VIVID Beta2 "Brutal Puppy" Final
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for VIVID Beta2 "Brutal Puppy" Final
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
rockedge has released tahr 6.0.6 uefi with a real time kernel on Sep 7, 20187
More information and forum discussions:
http://murga-linux.com/puppy/viewtopic.php?t=114239
Download:
http://rockedge.org/kernels/
I have created 6 half-Chinese language pets for tahr rt 6.0.6 :
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.0.2.pet (24 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.0.2.pet (23 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.0.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.2.pet (9.5 mb)
Plus 2 Chinese language pets for tahr rt 6.0.6:
Simplified Chinese:
tahr-rt.6.0.6-zhcn-16.0.1.pet (3.2 mb)
Traditional Chinese:
tahr-rt.6.0.6-zhhk-16.0.1.pet (2.7 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in tahr rt 6.0.6
(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for tahr rt 6.0.6
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
More information and forum discussions:
http://murga-linux.com/puppy/viewtopic.php?t=114239
Download:
http://rockedge.org/kernels/
I have created 6 half-Chinese language pets for tahr rt 6.0.6 :
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.0.2.pet (24 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.0.2.pet (23 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.0.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.2.pet (9.5 mb)
Plus 2 Chinese language pets for tahr rt 6.0.6:
Simplified Chinese:
tahr-rt.6.0.6-zhcn-16.0.1.pet (3.2 mb)
Traditional Chinese:
tahr-rt.6.0.6-zhhk-16.0.1.pet (2.7 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in tahr rt 6.0.6
(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for tahr rt 6.0.6
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
rockedge has released xenial 7.5 with a real time kernel on Sep 7, 2018
More information and forum discussions:
http://murga-linux.com/puppy/viewtopic.php?t=114239
Download:
http://rockedge.org/kernels/
I have created 6 half-Chinese language pets each for xenial rt 7.5 :
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-16.0.1.pet (24.5 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-16.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for xenial rt 7.5:
Simplified Chinese:
xenial-rt.7.5-zhcn-16.0.1.pet (3.2 mb)
Traditional Chinese:
xenial-rt.7.5-zhhk-16.0.1.pet (2.7 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in xenial rt 7.5
(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for xenial rt 7.5
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
More information and forum discussions:
http://murga-linux.com/puppy/viewtopic.php?t=114239
Download:
http://rockedge.org/kernels/
I have created 6 half-Chinese language pets each for xenial rt 7.5 :
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-16.0.1.pet (24.5 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-16.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for xenial rt 7.5:
Simplified Chinese:
xenial-rt.7.5-zhcn-16.0.1.pet (3.2 mb)
Traditional Chinese:
xenial-rt.7.5-zhhk-16.0.1.pet (2.7 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in xenial rt 7.5
(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for xenial rt 7.5
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the released of LxPupSc 18.06M-k64 on Jun 2, 2018, LxPupSc 18.06.01M-k64 to 18.06.04M-k64 (Sep 14, 2018) were subsequently released
Main features (based on the latest 18.06M-k64 version):
- kernel 4.16.13 64-bit built with GCC-7.3.0
(alternative 32-bit kernels 3.16.x 4.4.x & 4.9.x also available - all need firmware in the fdrv)
- Made from Slackware-Current as of Fri Jun 1 21:28:10 UTC 2018
- BUILD_FROM_WOOF='master;b434351e;2018-05-24 23:29:04 +0800'
- web browser in adrv is light-48.0
- ffmpeg is upgraded to 4.0
- firmware is in fdrv
- alternative fall-back xorg is in ydrv
Chromium, Firefox, Palemoon and Seamonkey are in the repository and installable via Internet -> Get Web Browser
More information:
http://murga-linux.com/puppy/viewtopic. ... 181#994181
Download for delta from LxPupSc 18.06M-k64 to 18.06.04M:
https://sourceforge.net/projects/lxpup/ ... a/download
I have created 6 half-Chinese language pets for LxPupSc 18.06.04M-k64:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc 18.06.04M-k64:
Simplified Chinese:
lxpupsc-18.06.04M.k64-zhcn-17.0.1.pet (3.6 mb)
Traditional Chinese:
lxpupsc-18.06.04M.k64-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 18.06.04M-k64
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 18.06.04M-k64
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Main features (based on the latest 18.06M-k64 version):
- kernel 4.16.13 64-bit built with GCC-7.3.0
(alternative 32-bit kernels 3.16.x 4.4.x & 4.9.x also available - all need firmware in the fdrv)
- Made from Slackware-Current as of Fri Jun 1 21:28:10 UTC 2018
- BUILD_FROM_WOOF='master;b434351e;2018-05-24 23:29:04 +0800'
- web browser in adrv is light-48.0
- ffmpeg is upgraded to 4.0
- firmware is in fdrv
- alternative fall-back xorg is in ydrv
Chromium, Firefox, Palemoon and Seamonkey are in the repository and installable via Internet -> Get Web Browser
More information:
http://murga-linux.com/puppy/viewtopic. ... 181#994181
Download for delta from LxPupSc 18.06M-k64 to 18.06.04M:
https://sourceforge.net/projects/lxpup/ ... a/download
I have created 6 half-Chinese language pets for LxPupSc 18.06.04M-k64:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc 18.06.04M-k64:
Simplified Chinese:
lxpupsc-18.06.04M.k64-zhcn-17.0.1.pet (3.6 mb)
Traditional Chinese:
lxpupsc-18.06.04M.k64-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 18.06.04M-k64
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 18.06.04M-k64
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of LxPupSc64 18.06 +3 on Aug 4, 2018, peebee had released LxPupSc64 18.06 +4 (Aug 18, 2018) to 18.06 +7 (Sep 14, 2018) shortly
Main features:
New Woof-CE build based on Slackware64 Current
More information:
http://murga-linux.com/puppy/viewtopic. ... &start=225
Download iso:
http://archive.org/download/Puppy_Linux_Lxpup
I have created 6 half-Chinese language pets for LxPupSc64 18.06+7:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.7.pet (23 mb)
scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.7.pet (19 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.7.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.7.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.7.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.7.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc64 18.06+7:
Simplified Chinese:
lxpupsc64-18.06.07-zhcn-13.1.7.pet (2.4 mb)
Traditional Chinese:
lxpupsc64-18.06.07-zhhk-13.1.7.pet (1.6 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 18.06+7
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 18.06+7
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Main features:
New Woof-CE build based on Slackware64 Current
More information:
http://murga-linux.com/puppy/viewtopic. ... &start=225
Download iso:
http://archive.org/download/Puppy_Linux_Lxpup
I have created 6 half-Chinese language pets for LxPupSc64 18.06+7:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.7.pet (23 mb)
scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.7.pet (19 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.7.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.7.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.7.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.7.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc64 18.06+7:
Simplified Chinese:
lxpupsc64-18.06.07-zhcn-13.1.7.pet (2.4 mb)
Traditional Chinese:
lxpupsc64-18.06.07-zhhk-13.1.7.pet (1.6 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 18.06+7
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 18.06+7
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of LxPupBionic 18.05+8 on Jul 7, 2018, versions 18.05+9 (Jul 21, 2018) to 18.05+12 (Sep 1, 2018) has been released
More information and download:
http://lx-pup.weebly.com/upup-bionic.html
download iso:
https://sourceforge.net/projects/lxpup/ ... xPup18.05/
I have created 6 half-Chinese language pets for LxPupBionic 18.05+12:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupBionic 18.05+12:
Simplified Chinese:
lxpupbionic-18.05.12-zhcn-17.0.1.pet (3.7 mb)
Traditional Chinese:
lxpupbionic-18.05.12-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupBionic 18.05+12
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupBionic 18.05+12
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
More information and download:
http://lx-pup.weebly.com/upup-bionic.html
download iso:
https://sourceforge.net/projects/lxpup/ ... xPup18.05/
I have created 6 half-Chinese language pets for LxPupBionic 18.05+12:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupBionic 18.05+12:
Simplified Chinese:
lxpupbionic-18.05.12-zhcn-17.0.1.pet (3.7 mb)
Traditional Chinese:
lxpupbionic-18.05.12-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupBionic 18.05+12
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupBionic 18.05+12
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of easy os 0.9.2 Beaver (64 bit) on May 15, 2018 by barry k, versions 0.9.3 (Sep 19, 2018) and 0.9.4 (Sep 21, 2018) were subsequently released.
more information and annoucement notes:
0.9.4: http://bkhome.org/news/201809/easy-beav ... eased.html
0.9.3: http://bkhome.org/news/201809/easy-beav ... eased.html
download addresses:
http://distro.ibiblio.org/easyos/amd64/releases/beaver/
I have created 6 half-Chinese language pets for easy os 0.9.4:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-xenial-16.1.3.pet (21.6 mb)
scim Chinese input platform:
scim64_1.4.9-en-zh-xenial-16.1.3.pet (18.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3.pet (9.5 mb)
Plus 2 Chinese language pets for easy os 0.9.4:
Simplified Chinese:
easyos-beaver-0.9.4-zhcn-16.1.3.pet (3.0 mb)
Traditional Chinese:
easyos-beaver-0.9.4-zhhk-16.1.3.pet (2.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy os beaver 0.9.4
(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy os beaver 0.9.4
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
more information and annoucement notes:
0.9.4: http://bkhome.org/news/201809/easy-beav ... eased.html
0.9.3: http://bkhome.org/news/201809/easy-beav ... eased.html
download addresses:
http://distro.ibiblio.org/easyos/amd64/releases/beaver/
I have created 6 half-Chinese language pets for easy os 0.9.4:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-xenial-16.1.3.pet (21.6 mb)
scim Chinese input platform:
scim64_1.4.9-en-zh-xenial-16.1.3.pet (18.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3.pet (9.5 mb)
Plus 2 Chinese language pets for easy os 0.9.4:
Simplified Chinese:
easyos-beaver-0.9.4-zhcn-16.1.3.pet (3.0 mb)
Traditional Chinese:
easyos-beaver-0.9.4-zhhk-16.1.3.pet (2.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy os beaver 0.9.4
(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy os beaver 0.9.4
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of x-slacko 4.4 slim systems r22, mistfire has released r23 shortly after
More information:
x-slacko 4.4 slim: http://murga-linux.com/puppy/viewtopic.php?t=107313
Download iso:
https://archive.org/details/Puppy_Linux_xslacko-slim
I have created 6 half-Chinese language pets for x-slacko 4.4 slim r23:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.2.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.2.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.2.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.1.pet (9.5 mb)
Plus 2 Chinese language pets for x-slacko 4.4 slim r23:
Simplified Chinese:
xslacko-4.4slimr23-zhcn-12.2.1.pet (2.0 mb)
Traditional Chinese:
xslacko-4.4slimr23-zhhk-12.2.1.pet (1.9 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x-slacko slim r23
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for x-slacko 4.4 slim r23
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
More information:
x-slacko 4.4 slim: http://murga-linux.com/puppy/viewtopic.php?t=107313
Download iso:
https://archive.org/details/Puppy_Linux_xslacko-slim
I have created 6 half-Chinese language pets for x-slacko 4.4 slim r23:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.2.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.2.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.2.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.1.pet (9.5 mb)
Plus 2 Chinese language pets for x-slacko 4.4 slim r23:
Simplified Chinese:
xslacko-4.4slimr23-zhcn-12.2.1.pet (2.0 mb)
Traditional Chinese:
xslacko-4.4slimr23-zhhk-12.2.1.pet (1.9 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x-slacko slim r23
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for x-slacko 4.4 slim r23
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of LxPupSc64 18.06 +7 on Sep 14, 2018, peebee had released LxPupSc64 18.06 +8 (Sep 23, 2018) and 18.06 +9 (Sep 30, 2018) shortly
Main features:
New Woof-CE build based on Slackware64 Current
More information:
http://murga-linux.com/puppy/viewtopic. ... &start=270
Download iso:
http://archive.org/download/Puppy_Linux_Lxpup
I have created 6 half-Chinese language pets for LxPupSc64 18.06+8 and 18.06+9:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.7.pet (23 mb)
scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.7.pet (19 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.7.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.7.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.7.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.7.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc64 18.06+8 and 18.06+9:
Simplified Chinese:
lxpupsc64-18.06.08-zhcn-13.1.7.pet (2.4 mb)
lxpupsc64-18.06.09-zhcn-13.1.7.pet (2.4 mb)
Traditional Chinese:
lxpupsc64-18.06.08-zhhk-13.1.7.pet (1.6 mb)
lxpupsc64-18.06.09-zhhk-13.1.7.pet (1.6 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 18.06+8 and 18.06+9
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 18.06+8 and 18.06+9
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Main features:
New Woof-CE build based on Slackware64 Current
More information:
http://murga-linux.com/puppy/viewtopic. ... &start=270
Download iso:
http://archive.org/download/Puppy_Linux_Lxpup
I have created 6 half-Chinese language pets for LxPupSc64 18.06+8 and 18.06+9:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.7.pet (23 mb)
scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.7.pet (19 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.7.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.7.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.7.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.7.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc64 18.06+8 and 18.06+9:
Simplified Chinese:
lxpupsc64-18.06.08-zhcn-13.1.7.pet (2.4 mb)
lxpupsc64-18.06.09-zhcn-13.1.7.pet (2.4 mb)
Traditional Chinese:
lxpupsc64-18.06.08-zhhk-13.1.7.pet (1.6 mb)
lxpupsc64-18.06.09-zhhk-13.1.7.pet (1.6 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 18.06+8 and 18.06+9
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 18.06+8 and 18.06+9
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of upupbb-18.05+2EngHun-csipesz-2018june on May 29, 2018, csipsez has released 3more Puppy derivatives on Sep 24, 2018:
UpupBB1805+12SlimNoBrowser2018SeptCsipesz (263 MB) (hereinafter called UpupBB180512_no_browser)
UpupBB1805+12SlimEngHun2018SeptCsipesz (338 MB) (hereinafter called UpupBB180512_EngHun)
UpupBB1805+12SlimMagyarWINE2018SzeptCsipesz (688 MB) (Hungarian only)
More information:
http://www.murga-linux.com/puppy/viewtopic.php?t=114350
Download iso:
https://drive.google.com/drive/folders/ ... zeWq39H9Vw
I have created 6 half-Chinese language pets for UpupBB180512_no_browser and UpupBB180512_EngHun:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.s.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.s.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.s.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.s.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.s.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.s.1.pet (9.5 mb)
Plus 2 Chinese language pets each for UpupBB180512_no_browser and UpupBB180512_EngHun:
Simplified Chinese:
UpupBB-18.05.12.SlimNoBrowser2018SepCsip-zhcn-17.s.1.pet (3.6 mb)
UpupBB-18.05.12.SlimEngHun2018SepCsip-zhcn-17.s.1.pet (3.6 mb)
Traditional Chinese:
UpupBB-18.05.12.SlimNoBrowser2018SepCsip-zhhk-17.s.1.pet (2.9 mb)
UpupBB-18.05.12.SlimEngHun2018SepCsip-zhhk-17.s.1.pet (2.9 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in UpupBB180512_no_browser and UpupBB180512_EngHun
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for UpupBB180512_no_browser and UpupBB180512_EngHun
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
UpupBB1805+12SlimNoBrowser2018SeptCsipesz (263 MB) (hereinafter called UpupBB180512_no_browser)
UpupBB1805+12SlimEngHun2018SeptCsipesz (338 MB) (hereinafter called UpupBB180512_EngHun)
UpupBB1805+12SlimMagyarWINE2018SzeptCsipesz (688 MB) (Hungarian only)
More information:
http://www.murga-linux.com/puppy/viewtopic.php?t=114350
Download iso:
https://drive.google.com/drive/folders/ ... zeWq39H9Vw
I have created 6 half-Chinese language pets for UpupBB180512_no_browser and UpupBB180512_EngHun:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.s.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.s.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.s.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.s.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.s.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.s.1.pet (9.5 mb)
Plus 2 Chinese language pets each for UpupBB180512_no_browser and UpupBB180512_EngHun:
Simplified Chinese:
UpupBB-18.05.12.SlimNoBrowser2018SepCsip-zhcn-17.s.1.pet (3.6 mb)
UpupBB-18.05.12.SlimEngHun2018SepCsip-zhcn-17.s.1.pet (3.6 mb)
Traditional Chinese:
UpupBB-18.05.12.SlimNoBrowser2018SepCsip-zhhk-17.s.1.pet (2.9 mb)
UpupBB-18.05.12.SlimEngHun2018SepCsip-zhhk-17.s.1.pet (2.9 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in UpupBB180512_no_browser and UpupBB180512_EngHun
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for UpupBB180512_no_browser and UpupBB180512_EngHun
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of easy os 0.9.6 on Aug 6, 2018 by barry k, versions 0.9.7 was subsequently released on Oct 14, 2018.
more information and annoucement notes:
http://murga-linux.com/puppy/viewtopic.php?t=109958
download addresses:
http://distro.ibiblio.org/easyos/amd64/ ... yro/0.9.7/
I have created 6 half-Chinese language pets for easy os 0.9.7:
fcitx Chinese input platform:
64 bit: fcitx64_4.2.7-en-zh-xenial-16.1.3.pet (21.6 mb)
scim Chinese input platform:
64 bit: scim64_1.4.9-en-zh-xenial-16.1.3.pet (18.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3.pet (9.5 mb)
Plus 2 Chinese language pets for easy os 0.9.7:
Simplified Chinese:
easyos-0.9.7-zhcn-16.1.3.pet (3.0 mb)
Traditional Chinese:
easyos-0.9.7-zhhk-16.1.3.pet (2.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy os 0.9.7
(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy os 0.9.7
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
more information and annoucement notes:
http://murga-linux.com/puppy/viewtopic.php?t=109958
download addresses:
http://distro.ibiblio.org/easyos/amd64/ ... yro/0.9.7/
I have created 6 half-Chinese language pets for easy os 0.9.7:
fcitx Chinese input platform:
64 bit: fcitx64_4.2.7-en-zh-xenial-16.1.3.pet (21.6 mb)
scim Chinese input platform:
64 bit: scim64_1.4.9-en-zh-xenial-16.1.3.pet (18.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3.pet (9.5 mb)
Plus 2 Chinese language pets for easy os 0.9.7:
Simplified Chinese:
easyos-0.9.7-zhcn-16.1.3.pet (3.0 mb)
Traditional Chinese:
easyos-0.9.7-zhhk-16.1.3.pet (2.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy os 0.9.7
(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy os 0.9.7
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the released of LxPupSc 18.06.04M-k64 on Sep 14, 2018, LxPupSc 18.06.05M-k64 to 18.06.07M-k64 (Oct 26, 2018) were subsequently released
Main features (based on the latest 18.06M-k64 version):
- kernel 4.16.13 64-bit built with GCC-7.3.0
(alternative 32-bit kernels 3.16.x 4.4.x & 4.9.x also available - all need firmware in the fdrv)
- Made from Slackware-Current as of Fri Jun 1 21:28:10 UTC 2018
- BUILD_FROM_WOOF='master;b434351e;2018-05-24 23:29:04 +0800'
- web browser in adrv is light-48.0
- ffmpeg is upgraded to 4.0
- firmware is in fdrv
- alternative fall-back xorg is in ydrv
Chromium, Firefox, Palemoon and Seamonkey are in the repository and installable via Internet -> Get Web Browser
More information:
http://murga-linux.com/puppy/viewtopic.php?t=101527
Download for delta from LxPupSc 18.06M-k64 to 18.06.05M and 18.06.07M:
https://sourceforge.net/projects/lxpup/ ... a/download
https://sourceforge.net/projects/lxpup/ ... a/download
https://sourceforge.net/projects/lxpup/ ... a/download
I have created 6 half-Chinese language pets for LxPupSc 18.06.06M-k64 and 18.06.07M-k64:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc 18.06.04M-k64:
Simplified Chinese:
lxpupsc-18.06.06M.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-18.06.07M.k64-zhcn-17.0.1.pet (3.6 mb)
Traditional Chinese:
lxpupsc-18.06.06M.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-18.06.07M.k64-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 18.06.06M-k64 and 18.06.07M-k64
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 18.06.06M-k64 and 18.06.07M-k64
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Main features (based on the latest 18.06M-k64 version):
- kernel 4.16.13 64-bit built with GCC-7.3.0
(alternative 32-bit kernels 3.16.x 4.4.x & 4.9.x also available - all need firmware in the fdrv)
- Made from Slackware-Current as of Fri Jun 1 21:28:10 UTC 2018
- BUILD_FROM_WOOF='master;b434351e;2018-05-24 23:29:04 +0800'
- web browser in adrv is light-48.0
- ffmpeg is upgraded to 4.0
- firmware is in fdrv
- alternative fall-back xorg is in ydrv
Chromium, Firefox, Palemoon and Seamonkey are in the repository and installable via Internet -> Get Web Browser
More information:
http://murga-linux.com/puppy/viewtopic.php?t=101527
Download for delta from LxPupSc 18.06M-k64 to 18.06.05M and 18.06.07M:
https://sourceforge.net/projects/lxpup/ ... a/download
https://sourceforge.net/projects/lxpup/ ... a/download
https://sourceforge.net/projects/lxpup/ ... a/download
I have created 6 half-Chinese language pets for LxPupSc 18.06.06M-k64 and 18.06.07M-k64:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc 18.06.04M-k64:
Simplified Chinese:
lxpupsc-18.06.06M.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-18.06.07M.k64-zhcn-17.0.1.pet (3.6 mb)
Traditional Chinese:
lxpupsc-18.06.06M.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-18.06.07M.k64-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 18.06.06M-k64 and 18.06.07M-k64
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 18.06.06M-k64 and 18.06.07M-k64
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the released of slacko 5.8CE r6288 on Jun 9, 2018 by Sailor Enceladus, slacko 5.8.2 r6531 has been released on Oct 17, 2018.
More information:
http://www.murga-linux.com/puppy/viewto ... 0&start=45
Download iso:
https://www.mediafire.com/folder/kwhxksubf00ny/14.0
I have created 6 half-Chinese language pets for slacko 5.8.2 r6531:
fcitx Chinese input platform half-Chinese pet:
fcitx_4.2.0-en-zh-precise-12.2.0.pet (24.6 mb)
scim Chinese input platform half-Chinese pet:
scim_1.4.9-en-zh-precise-12.2.0.pet (22.1 mb)111
yong Chinese input platform half-Chinese pets:
yong3264_4.2.0-en-zh-precise-12.2.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.0.pet (9.5 mb)
Plus 2 Chinese language pets each for slacko 5.8.2 r6531:
Simplified Chinese language pet:
slacko-5.8.2r6531-zhcn-12.2.0.pet (3.5 mb)
Traditional Chinese language pet:
slacko-5.8.2r6531-zhhk-12.2.0.pet (2.8 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in slacko 5.8.2 r6531
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for slacko 5.8.2 r6531
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
More information:
http://www.murga-linux.com/puppy/viewto ... 0&start=45
Download iso:
https://www.mediafire.com/folder/kwhxksubf00ny/14.0
I have created 6 half-Chinese language pets for slacko 5.8.2 r6531:
fcitx Chinese input platform half-Chinese pet:
fcitx_4.2.0-en-zh-precise-12.2.0.pet (24.6 mb)
scim Chinese input platform half-Chinese pet:
scim_1.4.9-en-zh-precise-12.2.0.pet (22.1 mb)111
yong Chinese input platform half-Chinese pets:
yong3264_4.2.0-en-zh-precise-12.2.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.0.pet (9.5 mb)
Plus 2 Chinese language pets each for slacko 5.8.2 r6531:
Simplified Chinese language pet:
slacko-5.8.2r6531-zhcn-12.2.0.pet (3.5 mb)
Traditional Chinese language pet:
slacko-5.8.2r6531-zhhk-12.2.0.pet (2.8 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in slacko 5.8.2 r6531
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for slacko 5.8.2 r6531
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of puduan-7.0.0b3-uefi-devx_r6140.iso, Sailor Enceladus has released an updated version puduan-7.0.0b3-uefi-devx_r6572 on Oct 17, 2018
Download iso:
https://my.pcloud.com/publink/show?code ... 2316302861
I have created 6 half-Chinese language pets for puduan-7.0.0b3-uefi-devx_r6572.iso:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.0.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.0.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.0.pet (9.5 mb)
Plus 2 Chinese language pets for puduan-7.0.0b3-uefi-devx_r6572.iso:
Simplified Chinese:
puduan-7.0.0b3r6572-zhcn-17.0.0.pet (3.5 mb)
Traditional Chinese:
puduan-7.0.0b3r6572-zhhk-17.0.0.pet (3.0 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in puduan-7.0.0b3-uefi-devx_r6572.iso
(b) the 2 Chinese language pets will give you Simplified Chinese (zhcn pet) or Traditional Chinese (zhhk pet) menus, icon labels, tooltips for puduan-7.0.0b3-uefi-devx_r6572.iso
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Download iso:
https://my.pcloud.com/publink/show?code ... 2316302861
I have created 6 half-Chinese language pets for puduan-7.0.0b3-uefi-devx_r6572.iso:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.0.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.0.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.0.pet (9.5 mb)
Plus 2 Chinese language pets for puduan-7.0.0b3-uefi-devx_r6572.iso:
Simplified Chinese:
puduan-7.0.0b3r6572-zhcn-17.0.0.pet (3.5 mb)
Traditional Chinese:
puduan-7.0.0b3r6572-zhhk-17.0.0.pet (3.0 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in puduan-7.0.0b3-uefi-devx_r6572.iso
(b) the 2 Chinese language pets will give you Simplified Chinese (zhcn pet) or Traditional Chinese (zhhk pet) menus, icon labels, tooltips for puduan-7.0.0b3-uefi-devx_r6572.iso
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of LxPupBionic 18.05+12 on Sep 1, 2018, version 18.05+16 (Oct 27, 2018) has been released
More information and download:
http://lx-pup.weebly.com/upup-bionic.html
http://www.murga-linux.com/puppy/viewto ... &start=960
download iso:
http://distro.ibiblio.org/puppylinux/pu ... -18.05.htm
I have created 6 half-Chinese language pets for LxPupBionic 18.05+16:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupBionic 18.05+16:
Simplified Chinese:
lxpupbionic-18.05.16-zhcn-17.0.1.pet (3.7 mb)
Traditional Chinese:
lxpupbionic-18.05.16-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupBionic 18.05+16
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupBionic 18.05+16
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
More information and download:
http://lx-pup.weebly.com/upup-bionic.html
http://www.murga-linux.com/puppy/viewto ... &start=960
download iso:
http://distro.ibiblio.org/puppylinux/pu ... -18.05.htm
I have created 6 half-Chinese language pets for LxPupBionic 18.05+16:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupBionic 18.05+16:
Simplified Chinese:
lxpupbionic-18.05.16-zhcn-17.0.1.pet (3.7 mb)
Traditional Chinese:
lxpupbionic-18.05.16-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupBionic 18.05+16
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupBionic 18.05+16
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the released of LxPupSc 18.06.07M-k64 on Oct 26, 2018, LxPupSc 18.06.08M-k64 (Nov 5, 2018) was subsequently released
Main features (based on the latest 18.08M-k64 version):
- kernel 4.19.1 64-bit built with GCC-8.2.0
More information:
http://www.murga-linux.com/puppy/viewto ... start=1035
Download for delta from LxPupSc 18.06M-k64 to 18.06.08M:
https://sourceforge.net/projects/lxpup/ ... /interims/
I have created 6 half-Chinese language pets for LxPupSc 18.06.08M-k64:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc 18.06.08M-k64:
Simplified Chinese:
lxpupsc-18.06.08M.k64-zhcn-17.0.1.pet (3.6 mb)
Traditional Chinese:
lxpupsc-18.06.08M.k64-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 18.06.08M-k64
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 18.06.08M-k64
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Main features (based on the latest 18.08M-k64 version):
- kernel 4.19.1 64-bit built with GCC-8.2.0
More information:
http://www.murga-linux.com/puppy/viewto ... start=1035
Download for delta from LxPupSc 18.06M-k64 to 18.06.08M:
https://sourceforge.net/projects/lxpup/ ... /interims/
I have created 6 half-Chinese language pets for LxPupSc 18.06.08M-k64:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc 18.06.08M-k64:
Simplified Chinese:
lxpupsc-18.06.08M.k64-zhcn-17.0.1.pet (3.6 mb)
Traditional Chinese:
lxpupsc-18.06.08M.k64-zhhk-17.0.1.pet (3.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 18.06.08M-k64
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 18.06.08M-k64
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
csipsez has released a Puppy derivatives UpupCC-18.10.K4.9.134-2018NovCsipesz (263 MB) (hereinafter called UpupCC1810) on Nov 7, 2018:
More information:
http://www.murga-linux.com/puppy/viewtopic.php?t=114646
Download iso:
https://drive.google.com/file/d/1yj39Pw ... sp=sharing
I have created 6 half-Chinese language pets for UpupCC1810:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.s.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.s.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.s.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.s.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.s.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.s.1.pet (9.5 mb)
Plus 2 Chinese language pets each for UpupCC1810:
Simplified Chinese:
UpupCC-18.10.K491342018NovCsip-zhcn-17.s.1.pet (3.6 mb)
Traditional Chinese:
UpupCC-18.10.K491342018NovCsip-zhhk-17.s.1.pet (2.9 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in UpupCC1810
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for UpupCC1810
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
More information:
http://www.murga-linux.com/puppy/viewtopic.php?t=114646
Download iso:
https://drive.google.com/file/d/1yj39Pw ... sp=sharing
I have created 6 half-Chinese language pets for UpupCC1810:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.s.1.pet (24.6 mb)
scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.s.1.pet (22.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.s.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.s.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.s.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.s.1.pet (9.5 mb)
Plus 2 Chinese language pets each for UpupCC1810:
Simplified Chinese:
UpupCC-18.10.K491342018NovCsip-zhcn-17.s.1.pet (3.6 mb)
Traditional Chinese:
UpupCC-18.10.K491342018NovCsip-zhhk-17.s.1.pet (2.9 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in UpupCC1810
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for UpupCC1810
for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of easy os 0.9.7 on Oct 14, 2018 by barry k, versions 0.9.8 was subsequently released on Nov 14, 2018.
more information and annoucement notes:
http://murga-linux.com/puppy/viewtopic.php?t=109958
download addresses:
http://distro.ibiblio.org/easyos/amd64/ ... yro/0.9.8/
I have created 6 half-Chinese language pets for easy os 0.9.8:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-xenial-16.1.3.pet (21.6 mb)
scim Chinese input platform:
scim64_1.4.9-en-zh-xenial-16.1.3.pet (18.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3.pet (9.5 mb)
Plus 2 Chinese language pets for easy os 0.9.8:
Simplified Chinese:
easyos-0.9.8-zhcn-16.1.3.pet (3.0 mb)
Traditional Chinese:
easyos-0.9.8-zhhk-16.1.3.pet (2.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy os 0.9.8
(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy os 0.9.8
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
more information and annoucement notes:
http://murga-linux.com/puppy/viewtopic.php?t=109958
download addresses:
http://distro.ibiblio.org/easyos/amd64/ ... yro/0.9.8/
I have created 6 half-Chinese language pets for easy os 0.9.8:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-xenial-16.1.3.pet (21.6 mb)
scim Chinese input platform:
scim64_1.4.9-en-zh-xenial-16.1.3.pet (18.1 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3.pet (9.5 mb)
Plus 2 Chinese language pets for easy os 0.9.8:
Simplified Chinese:
easyos-0.9.8-zhcn-16.1.3.pet (3.0 mb)
Traditional Chinese:
easyos-0.9.8-zhhk-16.1.3.pet (2.5 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy os 0.9.8
(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy os 0.9.8
more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Chinese language pets
Further to the release of LxPupSc64 18.06 +9 on Sep 30, 2018, peebee had released LxPupSc64 18.06 +11 (Oct 26, 2018) and 18.06 +12 (Nov 10, 2018) shortly
Main features:
New Woof-CE build based on Slackware64 Current
More information:
http://murga-linux.com/puppy/viewtopic. ... &start=285
Download iso:
http://archive.org/download/Puppy_Linux_Lxpup
I have created 6 half-Chinese language pets for LxPupSc64 18.06+11 and 18.06+12:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.7.pet (23 mb)
scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.7.pet (19 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.7.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.7.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.7.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.7.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc64 18.06+11 and 18.06+12:
Simplified Chinese:
lxpupsc64-18.06.11-zhcn-13.1.7.pet (2.4 mb)
lxpupsc64-18.06.12-zhcn-13.1.7.pet (2.4 mb)
Traditional Chinese:
lxpupsc64-18.06.11-zhhk-13.1.7.pet (1.6 mb)
lxpupsc64-18.06.12-zhhk-13.1.7.pet (1.6 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 18.06+11 and 18.06+12
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 18.06+11 and 18.06+12
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.
Main features:
New Woof-CE build based on Slackware64 Current
More information:
http://murga-linux.com/puppy/viewtopic. ... &start=285
Download iso:
http://archive.org/download/Puppy_Linux_Lxpup
I have created 6 half-Chinese language pets for LxPupSc64 18.06+11 and 18.06+12:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.7.pet (23 mb)
scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.7.pet (19 mb)
yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.7.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.7.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.7.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.7.pet (9.5 mb)
Plus 2 Chinese language pets for LxPupSc64 18.06+11 and 18.06+12:
Simplified Chinese:
lxpupsc64-18.06.11-zhcn-13.1.7.pet (2.4 mb)
lxpupsc64-18.06.12-zhcn-13.1.7.pet (2.4 mb)
Traditional Chinese:
lxpupsc64-18.06.11-zhhk-13.1.7.pet (1.6 mb)
lxpupsc64-18.06.12-zhhk-13.1.7.pet (1.6 mb)
To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 18.06+11 and 18.06+12
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 18.06+11 and 18.06+12
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject
All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.