Author |
Message |
belham2
Joined: 15 Aug 2016 Posts: 1743
|
Posted: Thu 16 Aug 2018, 11:06 Post subject:
does anyone get pBurn to ever work in a laptop? |
|
Hi guys,
I've have always historic rotten luck with pburn, or puppy's included "burnISO2cd". Both programs, across any puppy, just eat & waste new discs like nothing else.
I've tried laptop-built-in CD/DVD players, and external USB cd/DVD players. And I've tried different CD/DVD disc manufacturers and the same thing.
What can it be? Here is an example, using 700mb CD with an external USB player that works across all my other Linux distributions (from Manjaro/Fedora to Debian to Ubuntu).
Here's the log I get, and a pic follows of where it stops: Thank you in advance for anyone looking at this and can see what is going on (this happens in Tahr, Xenial, Dpups, etc----pBurn & burnISO2cd just eat all different mftr discs no matter what cd/dvd players I use):
Code: | Pburn version 4.3.16
###################################################
COMMAND:
###################################################
cdrecord -multi -tao -v speed=8 dev=/dev/sr0 driveropts=burnfree "/root/Downloads/xerus64-8.6.iso"
###################################################
OUTPUT:
###################################################
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.02a06 (i686-pc-linux-gnu) Copyright (C) 1995-2016 Joerg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identifikation : 'DVD-RAM UJ8C2 '
Revision : '1000'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-RAM
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW restricted overwrite
Profile: DVD-RW sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 327680 = 320 KB
FIFO size : 4194304 = 4096 KB
resid: 60
Track 01: data 422 MB
Total size: 484 MB (48:00.88) = 216066 sectors
Lout start: 484 MB (48:02/66) = 216066 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Disk Is not unrestricted
Disk Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Capacity Blklen/Sparesz. Format-type Type
359846 2048 0x00 Unformated or Blank Media
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 143780
Starting to write CD/DVD/BD at speed 8 in real TAO mode for multi session.
Last chance to quit, starting real write in 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... resid: 60
resid: 60
input buffer ready.
BURN-Free is ON.
Performing OPC...
resid: 60
Starting new track at sector: 0
Track 01: 0 of 422 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.003s timeout 40s
cdrecord: The current problem looks like a buffer underrun.
cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
cdrecord: Please report.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 0 bytes
Writing time: 14.832s (00:00:14.832)
Average write speed 293.5x.
Fixating...
Fixating time: 33.166s (00:00:33.166)
cdrecord: fifo had 65 puts and 2 gets.
cdrecord: fifo was 0 times empty and 1 times full, min fill was 98%. |
 |
Description |
|
Filesize |
183.12 KB |
Viewed |
263 Time(s) |

|
|
Back to top
|
|
 |
ITSMERSH
Joined: 02 May 2018 Posts: 911
|
Posted: Thu 16 Aug 2018, 11:12 Post subject:
|
|
Just rarely entered this just a very few times much earlier in Lucid.
My last CD burnt with pBurn is appr. 5 weeks ago. My Puppy is Tahr based, 6.0.2.
_________________ RSH
Beware of the Dog ähem nic007! 
|
Back to top
|
|
 |
Flash
Official Dog Handler

Joined: 04 May 2005 Posts: 13653 Location: Arizona USA
|
Posted: Thu 16 Aug 2018, 11:58 Post subject:
|
|
Laptop optical drives seem to be different from desktop optical drives. Burniso2cd has never failed to make a good DVD and I've had pretty good luck burning DVDs and Blu-Ray disks with Pburn, in my desktop -- until the last time I tried to burn a Blu-Ray disk. I don't know why it wouldn't work. I was using Quirky Werewolf. I didn't have time to try to figure it out, so I put the data on a flash drive instead.
|
Back to top
|
|
 |
bigpup

Joined: 11 Oct 2009 Posts: 13981 Location: S.C. USA
|
Posted: Thu 16 Aug 2018, 13:11 Post subject:
|
|
Any of the warnings posted at the bottom of the first post apply to you?
Pburn
http://www.murga-linux.com/puppy/viewtopic.php?t=23881
Quote: | cdrecord: The current problem looks like a buffer underrun. |
See if you are doing what is required to not have this.
Quote: | It is not recommended to run other heavy applications (or powersaving/screensavers) while burning, as this can cause buffer under-runs if your PC was not able to allocate enough time to processing the burn. You will then have a useless disc. Choosing a burn speed that is too high, or CPU-priority that is too low, could also cause buffer under-runs.
Not all older drives can "see" beyond the first session. Few DVD-ROM units are capable of DVD-R multiborder playback and even fewer support DVD+R multisessioning. In other words your burner might be the only unit in your vicinity that can access data in the different sessions | .
_________________ The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
|
Back to top
|
|
 |
ally

Joined: 19 May 2012 Posts: 1983 Location: lincoln, uk
|
Posted: Fri 17 Aug 2018, 08:47 Post subject:
|
|
never had a burn fail using pburn
thinkpads and the occasional desktop
|
Back to top
|
|
 |
Flash
Official Dog Handler

Joined: 04 May 2005 Posts: 13653 Location: Arizona USA
|
Posted: Fri 17 Aug 2018, 10:21 Post subject:
|
|
Thinkpads have optical drives? Or did you use a USB optical drive?
|
Back to top
|
|
 |
rockedge

Joined: 11 Apr 2012 Posts: 1874 Location: Connecticut, United States
|
Posted: Fri 17 Aug 2018, 11:07 Post subject:
|
|
my ThinkPad T-42 has an optical drive....not a burner just read
|
Back to top
|
|
 |
|